To use the program when you connect the device software it requires a key. Without this key the program is capable of operating but has no connection with the device. Without the key you may for example view the previously recorded files. The key can be found on the web site after the device registration with its serial number. The key provides the program operation with one device only.
Either the current voltage or the data of the file opened for reading is displayed on the graph in the record mode. In addition to the measured values curve there is a set values curve as well displayed with the same color that is used for the channel measurements curve but the tint is less bright. For those units not equipped with control ADC these curves will be identical. In Cursors box there are measurement values from both graph cursors. Also when saving the data to the file the number of the samples recorded is displayed in this box. Scale and shift allow the user to set the graph scales manually or automatically using button. Here there are indicators of the current data output beyond the alarm signaling (they are on even when the alarm is off) and beyond the graph.
The software in the standard package of the device has no physical media (CD) and can be downloaded at www.tmatlantic.com after the purchasing and registering the equipment with a serial number. This software is not free however its cost is included into device value. 2b1af7f3a8